Monster High - Spectra Vondergeist Costume (Halloween Edition)

Have you decided what you want to be on halloween? Is Monster high a choice? Well a couple days ago i had the chance of making a costume resembling the Spectra doll from Monster High. Everything spooky and fantastic. Spectra is a ghost ghoul who runs the ghostly gossip at Monster High!

Finished product:

What you will need:

Materials

1. Silver cardboard (A4)
2. Your choice of silver string pattern (half a metre)
3. A black singlet
4. Purple material of your choice (i chose velvet) (1 metre)
5. Mesh netting material of your choice (i chose the softest shiny mesh) (half a metre)
6. Velcro (5cm)
7. Elastic waist band (half a metre)

Equipments

1. Glue gun
2. Sewing machine (can sew by hand or make entire outfit from glue gun)

Instructions

Skirt

1. Measure the person/childs waist, double the measurement by 2 and decide how long you want your       skirt to be. Then draw out the measurements onto your purple material. (example: waist = 40cm)

2. Place your cut material over your mesh and pin down the corners/sides and cut the mesh to size.             (ends up the same size as the purple material)

3. Get the elastic waistband and hold it around the child's waist, fit it making it tighter or more             loose for comfort. Then cut.

4. Sew or glue gun the edges of the purple material to prevent fraying. Folding in about half a cm.

5. Fold the material and mesh together four times to create a smaller width.

6. Decide which side you would like the bottom part of your skirt to be and cut the two edges to         create the points at the bottom of the skirt. (If the material frays you may want to fold and glue gun         the bottom edges or just lightly burn the edges with a lighter)

7. Sew or glue gun the two 30cm sides together so that they are attached (including the mesh. (the             length section of the skirt)

8. This is the tricky part. You want to get the elastic waistband and sew the edges together so that it becomes a complete circle. Now you need to sew the back of the skirt to the elastic. Just a locked stitch will do.

9. Stretch out the elastic and sew the elastic onto the skirt with a sewing machine DONT             FORGET THE MESH. (You can try and do this with a glue bun but it will take longer as you will       need to hold it in place until it dries)

Top

1. Measure the singlet and decide how wide you want the purple section of your top to be. Cut it out         with an extra 1cm on each side. Iron it down to keep a 1cm fold on each side.

2. Cut the patterned silver thread to fit the width of the purple material with an extra 1cm on each side.

3. Glue gun the silver pattered edges to the back of the purple material.

3. Centre the material on your singlet into place. (fix it to your liking) Then sew or glue gun onto the         centre of the singlet.

Belt

1. Measure the waist and cut out the silver cardboard with whatever width size you like. If the               cardboard is short. Cut another piece with an extra 1cm and glue the edges together. (do this however many times you need to get your desired length)

2. Find an object of which is round and flat then trace it onto the back of the silver cardboard to create         little ringlets for the belt. You will then cut the centre of the circles to shape it like a ring. Glue the           pieces to the silver band.

3. Stick velcro to the back of the belt for easy wear.

There you have your finished costume. If you want the matching boots you can either,

1. get a pair of old black boots and use the left over purple material and glue gun it to the boot covering it entirely. Or,
2. Find a pair of socks in the same colours. Or,
3. Make a pair of socks with the leftover material from scratch.

Feel free to contact me via email if you have any further questions. Thank You.

(ps. add some temporary purple hair chalk or go for the wig to look spooky fantastic!)

Don't forget to recommend and share this post if it was helpful to you!